Model number SSPA 0.050-6.000-100-RM is a high power, rack mounted, RF amplifier that operates from 50 to 6000 MHz minimum and is packaged in a rugged, rack mounted enclosure. This amplifier is in a 4u height, 19” rack. Typical output power at P3dB is greater than 100W from 50 to 5000 MHz, and 50W from 5000 to 6000 MHz. Nominal input power levels are -20 to -13 dBm to achieve 100W Pout. Input VSWR is 2.0:1 maximum. Standard features include output short and open circuit protection, over/under voltage protection, and a circuit breaker that will assert open in an over-current condition. This broadband system operates from +120 Vac. The unit is intended for operation in a laboratory environment, but was designed to withstand a much harsher environment. A thermal management system is designed into the unit to ensure high reliability. RF input connector is SMA female. RF output connector is Type N female. Enable and telemetry commands are available via a D-sub connector, and an AC line cord is included with the unit. All connectors and the AC voltage input are located on the rear panel of the unit.