Home Cover Products

Cover Products

Ultra-Wideband MMIC Precision Fixed Attenuators

The KAT series of MMIC precision fixed attenuators extends coverage to a wide array of applications from DC to 40 GHz, including 5G systems, microwave communications, satellite, defense and aerospace, and more. These fixed-value, absorptive attenuators are fabricated through highly repetitive MMIC processing with thin-film resistors on GaAs substrates and achieve ultra-wideband performance. MINI-CIRCUITS (81)

Broadband 3-Way Type N Power Dividers

This non-binary 3-way broadband power divider covers 0.500 to 6.00 GHz (803-4-3.250WWP), encompassing Public Safety through ISM bands. Typical performance specs include VSWR of 1.30:1, isolation 17 dB, insertion loss 1.2 dB, and exceptional amplitude and phase balance of 1.0 dB and 12º maximum. This is in addition to the family of 2-, 4-, 8-, […]

Ceramic Chip Inductors

The new 0201HL Series ceramic chip inductors are available in seven inductance values ranging from 22 to 51 nH, the highest currently offered in a wirewound 0201 package. This inductance range is fully optimized for impedance matching in 700 MHz LTE and 5G applications. The 0201HL Series also provides the highest Q factors currently available […]

RF Transceiver

Model ADRV9009 is a 200 MHz bandwidth RF transceiver. Tunable over a range of 75 MHz to 6 GHz, the single-chip transceiver provides a common radio platform that supports all 2G/3G/4G standards, while meeting the antenna density and network capacity requirements of 5G wireless infrastructure equipment and aerospace and defense systems. It features fast frequency […]

Four Channel Tunable Combiner

Part number SPCL-00636 is a four channel tunable combiner. It can be factory adjusted, covering the UHF band with each channel featuring a 2 MHz bandwidth. Channel to channel isolation, at 15 MHz channel spacing, is 40 dB with passband insertion loss of 2.0 dB maximum and power handling of 25W CW/100W peak. The small […]

YIG-Tuned Oscillators for 5G

The MLVG Series of YIG-tuned oscillators cover the frequency range from 6 to 21 GHz. These new Permanent Magnet based oscillator models have been specifically designed for the next generation requirements to support 5G applications. With up to 12 GHz tuning range, these oscillators provide excellent phase noise performance with low prime power requirements. All […]

Amps Assemblies with Detector-Coupler-Attenuator 

Model CA0022-351560ADTCS, part of a line of highly integrated amplifiers, provides instantaneous frequency coverage from 10 MHz to 22 GHz, 35 dB gain, +15 dBm P1dB PT, and low noise figure. It includes temperature compensation, voltage variable gain attenuation (15 dB), integrated wideband output coupler, and detected output with 10 dB minimum dynamic range, and […]

Flat Gain Wideband Amplifier

The ZVA-403GX+ is a coaxial, ultra-wideband amplifier offering flat gain across an extremely wide frequency range from 50 kHz to 40 GHz. This model operates on a single +5V supply with just 100mA typical current consumption, and is capable of delivering up to 20mW output power at 1 dB compression. The amplifier comes in a […]

Broadband 3-Way Type N Power Dividers

This non-binary, 3-way broadband power divider covers 0.500 to 6.000 GHz (803-4-3.250WWP), encompassing Public Safety through ISM bands. Typical performance of 1.30:1 VSWR, 17 dB isolation, 1.2 dB insertion loss, and exceptional amplitude and phase balance of 1.0 dB and 12º maximum. This is in addition to the family of 2-, 4-, 8-, and 16-way […]