GaN PAs Influence Radar Design
By Richard Lang, Managing Director, Diamond Microwave
Over the last decade, gallium nitride (GaN) high-power transistor technology has evolved to such an extent that it is now feasible as an alternative to vacuum tubes for the high output power levels demanded by radar systems. Read More...

MMD March 2014

Previous issues click here


Band Reject Filter Series
Higher frequency band reject (notch) filters are designed to operate over the frequency range of .01 to 28 GHz. These filters are characterized by having the reverse properties of band pass filters and are offered in multiple topologies. Available in compact sizes.
RLC Electronics

SP6T RF Switch
JSW6-33DR+ is a medium power reflective SP6T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator.

Group Delay Equalized Bandpass Filter
Part number 2903 is a group delayed equalized elliptic type bandpass filter that has a typical 1 dB bandwidth of 94 MHz and a typical 60 dB bandwidth of 171 MHz. Insertion loss is <2 dB and group delay variation from 110 to 170 MHz is <3nsec.
KR Electronics

Absorptive Low Pass Filter
Model AF9350 is a UHF, low pass filter that covers the 10 to 500 MHz band and has an average power rating of 400W CW. It incurs a rejection of 45 dB minimum at the 750 to 3000 MHz band, and power rating of 25W CW from 501 to 5000 MHz.

LTE Band 14 Ceramic Duplexer
This high performance LTE ceramic duplexer was designed and built for use in public safety communication and commercial cellular applications. It operates in Band 14 and offers low insertion loss and high isolation to enable clear communications in the LTE network.
Networks International

See all products in this issue


ADI Completes Acquisition of Hittite Microwave

“We are delighted to inform you that Analog Devices, Inc. (ADI) has successfully completed the acquisition of Hittite Microwave Corporation. We are excited to welcome Hittite’s employees, products, and technology to the ADI family.

With the close of this acquisition, we bring an exceptional company with a long and rich history into the ADI fold. By combining forces, we strengthen our innovation capability across RF, microwave, and millimeter wave applications, and create even greater value for you by addressing the entire frequency spectrum. Importantly, with the added talent, capabilities, and technologies that Hittite Microwave brings to ADI, we are able to serve you better as an integrated supplier for all of your analog, mixed-signal, RF, and microwave needs.

Since we announced our intentions to acquire Hittite Microwave in early June, ADI and Hittite Microwave have been planning diligently for the integration of our two companies in order to provide more customer value. A lot of momentum has been built and now that the acquisition is final, we will continue building on this progress to ensure we maintain our high levels of innovation, performance, and customer support. We are all fully committed to providing you with the best possible customer experience, and in order to assure just that, our plan is to conduct business as usual for the foreseeable future while we continue to combine the expertise and technology from ADI and Hittite Microwave.”

-- Thomas Wessel, Vice President, Worldwide Sales, Analog Devices
Wessel also invited us to visit to access FAQs designed to address potential questions about this acquisition. Also, please feel free to reach out to your ADI sales representative for additional information and to learn more about Hittite Microwave Products from Analog Devices.




You Can
Search by Number:

  All ads, articles, and products in printed issues of MPD have a number. Just look for the red arrow in the ad or at the end of the article or product description.


Uncertain Times for DefenseWill OpenRFM Shake Up the Microwave Industry?
By Barry Manz

Throughout the history of the RF and microwave industry there has never been a form factor standardizing the electromechanical, software, control plane, and thermal interfaces used by integrated microwave assemblies (IMAs) employed in defense systems. Rather, every system has been built to meet the requirements of a specific system, which may be but probably isn’t compatible with any other system. It’s simply the way the industry has always responded to requests from subcontractors that in turn must meet the physical, electrical, and RF requirements of prime contractors. Read More...

Home | About Us | Archives | Editorial Submissions | Media Kit (PDF) | Events | Subscribe/Renew | Contact Us
Copyright © 2014 Octagon Communication Inc. DBA MPDigest /, All Rights Reserved.
Privacy Policy | Site Map