The Opportunities and Challenges of LTE Unlicensed in 5 GHz
David Witkowski, Executive Director, Wireless Communications Initiative
In 1998, the Federal Communications Commission established the Unlicensed National Information Infrastructure or U-NII 5 GHz bands. These are used primarily for Wi-Fi networks in homes, offices, hotels, airports, and other public spaces and also consumer devices. U-NII is also used by wireless Internet Service Providers, linking public safety radio sites, and for monitoring and critical infrastructure such as gas/oil pipelines.

MMD March 2014

Previous issues click here


Band Reject Filter Series
Higher frequency band reject (notch) filters are designed to operate over the frequency range of .01 to 28 GHz. These filters are characterized by having the reverse properties of band pass filters and are offered in multiple topologies. Available in compact sizes.
RLC Electronics

SP6T RF Switch
JSW6-33DR+ is a medium power reflective SP6T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator.

Group Delay Equalized Bandpass Filter
Part number 2903 is a group delayed equalized elliptic type bandpass filter that has a typical 1 dB bandwidth of 94 MHz and a typical 60 dB bandwidth of 171 MHz. Insertion loss is <2 dB and group delay variation from 110 to 170 MHz is <3nsec.
KR Electronics

Absorptive Low Pass Filter
Model AF9350 is a UHF, low pass filter that covers the 10 to 500 MHz band and has an average power rating of 400W CW. It incurs a rejection of 45 dB minimum at the 750 to 3000 MHz band, and power rating of 25W CW from 501 to 5000 MHz.

LTE Band 14 Ceramic Duplexer
This high performance LTE ceramic duplexer was designed and built for use in public safety communication and commercial cellular applications. It operates in Band 14 and offers low insertion loss and high isolation to enable clear communications in the LTE network.
Networks International

See all products in this issue


B&K Precision Acquires Teknix S.A.

B&K Precision Corporation announced the acquisition of Teknix S.A., a service and calibration company based in São Paulo, Brasil. Under the new name of B&K Precision Brasil, the subsidiary company will become B&K Precision’s headquarters for South American operations. Antônio Freitas, who founded Teknix S.A. in 1999, will continue to serve as the manager of calibration and service operations of B&K Precision Brasil.

“With this acquisition, our company is laying the grounds for continued growth in the South American market. To better support our expanding customer base in Brasil and other South American countries and to understand their specific needs, it was important for us to establish our own operation in the region. This will allow us to provide the same level of service to our distributors and end user customers in South America as our US and other international customers are accustomed to,” said Victor Tolan, president and CEO of B&K Precision.

B&K Precision Brasil will directly import products from B&K Precision’s manufacturing sites, and continue selling B&K instruments via an authorized distributor network. The subsidiary will provide local service and support for B&K Precision instruments, and continue to operate as an authorized third party service and calibration center.

About B&K Precision
For more than 60 years, B&K Precision Corporation has been building a reputation for excellence in the design and manufacture of reliable and cost-effective test and measurement instruments. The company’s products are used in a wide range of applications including design, research and development, production line testing, industrial maintenance, and electronic field service. B&K Precision test and measurement instruments are standard equipment in a large number of universities and technical schools which train future engineers and technicians. B&K Precision was founded in 1951 and is headquartered in Yorba Linda, California.




You Can
Search by Number:

  All ads, articles, and products in printed issues of MPD have a number. Just look for the red arrow in the ad or at the end of the article or product description.


Uncertain Times for DefenseOpen’s Systems and Changes in DoD Procurement: This Time It’s Real
By Barry Manz

The U.S. Department of Defense has a well-earned reputation for inertia. Many proposals for change are made – but nothing happens. The COTS initiative, which promised cost savings through the use of off-the-shelf commercial parts, sounded terrific at the time. It heralded a major departure from standard DoD procurement that more or less guaranteed that every system would be different in part because it used parts that were developed from scratch, leading to “one-off” systems that were very expensive. Read More...

Home | About Us | Archives | Editorial Submissions | Media Kit (PDF) | Events | Subscribe/Renew | Contact Us
Copyright © 2014 Octagon Communication Inc. DBA MPDigest /, All Rights Reserved.
Privacy Policy | Site Map