| |
 |
•
Electro-Mechanical Broadband RF Switch.
• Single-Stage Driver Amplifier
•
Quad-Band EDGE Radio Solution
• Modeling
3G / WCDMA / HSDPA
• Composite Filters
• Integration of Waveguide
•
Coaxial Components
• Antennas Needed
• And More... |
|
|
|
|
 |
|
 |
| |
 
 Adjustable Resistor Family
A family of low power, low TC re-adjustable resistors has been designed to meet customer needs for a low cost, single element device to compensate and calibrate precision analog circuits. They are ideal for wireless, military, aerospace and satellite applications.
 TMBS Trench Schottky Rectifier
Model V30200C is the industry’s first 200V, 30A dual high-voltage TMBS® Trench Schottky rectifier. With an extremely low VF of 0.648V typical at 15A and +125ºC, and superior switching performance, it reduces power loss and improves efficiency.
 Reverse Polarity Terminations
These reverse polarity SMA male terminations were designed for Wi-Fi, WiMAX, and other wireless networking applications utilizing the 802.11b standard. They are RoHS compliant and have a frequency range of DC to 6 GHz with power handling of 1W.
 Precision Coaxial Connectors
The company’s lines of precision coaxial connectors for flexible and semi-rigid cables are also available as solder clamp attachments. Interfaces include 1.85, 2.4, 2.92, and 3.5mm, N, SMA, and TNC. Popular cable types are HP120, HP160, HP190, LL120, LL142, LL250, and LL335. Bulkhead types are also available.
 Moderate Band Reject Filter
The 5N45-4265/H1600-0/0 has a dense microwave spectrum that protects the receivers from newly deployed high-power transmitters. In such scenarios, the band reject filter is often specified as a “quick fix.” Extending the lower passband down to DC, while implementing advanced filter design techniques, can extend the upper passband to more than three times of center frequency. This enables strong rejection of moderate bandwidths.
 SMB Connectors
New 75 ohm SMB connectors are available in a wide range of configurations including plugs, right-angle plugs, and PCB jacks, and are suitable for use in applications with a frequency range up to 4 GHz. This series has broadband performance with low reflection and is ideally suited for circuit miniaturization.
 DDR2, DDR3 BGA Probes
The industry’s first DDR2 and DDR3 ball-grid array (BGA) probes for oscilloscopes and logic analyzers provide direct access to the balls of the DRAM with low loading and minimal impact to signal integrity.
 Type N to BNC Coaxial Adapter
Model NF-BM50+ is a coaxial adapter that mates a female Type N connector to a male BNC connector. It is well suited for use as a connector saver or to interconnect equipment with dissimilar connectors. Typical insertion loss is 0.06 dB from DC to 2 GHz .
 Digital Controlled Phase Shifter
Model PS-360-DC-3 Option 618 is a 6 to 18 GHz, 0 to 360º, 8 bit digitally controlled phase shifter with a switching speed of less than 50 nS, rise and fall time of less than 20 nS, insertion loss of 10 dB typical, 12 dB maximum. VSWR is 2.0:1.
 Wideband Passive Mixers
Four double balanced GaAs MESFET mixers for use in test and measurement systems, military radios, commercial sensors and transceiver infrastructure, including critical functions of fixed and mobile protocols such as WiMAX and VSAT applications, are now available.
 New Family of RF Amplifiers
The A3 family of amplifiers features an internal impedance transformer with selectable output impedance values of 12.5, 25, 50, 100, 200 and 400 ohms. An external impedance transformer is also available for applications requiring an extended range from 8 to 2000 ohms.
 Connectors for LMR Series Cable
A new family of connectors for LMR type cables includes male and female Type N, 7/16, SMA and TNC connectors in straight and right angle configurations which have clamp or crimp attachment methods. Frequency coverage is from DC to 18 GHz in standard 50 ohm impedance.
|
|
|
 |
|
|
 |
|
In
The News...
Anritsu and RFMW Announce,
Americas Distribution Agreement
Morgan Hill, CA and San Jose, CA - April 1, 2008 - Anritsu Company and
RFMW, Ltd. today announce an Americas distribution agreement effective
April 1, 2008. Under terms of the agreement, RFMW will market and sell
Anritsu's high-performance, high-frequency coaxial connectors and
components used in communications and test instrument applications.
RFMW, Ltd. is a specialized distributor that provides customers and
suppliers with focused distribution of RF and microwave components as
well as customer-specific component-engineering support. Anritsu is a
leader in the design and production of precision microwave components.
Anritsu created and trademarked the V and K connectors and continues to
develop innovative connector products. In addition, Anritsu manufactures
assemblies and components to meet specific customer requirements.
"RFMW's familiarity with our targeted RF/microwave customer base enables
them to recognize opportunities for Anritsu and provide expert level
support to our customers throughout the design process. RFMW is uniquely
capable of providing the expertise and resources necessary to cover our
wide range of customers from small developmental groups to OEMs and
contract manufacturers," said Larry Davis, Anritsu Government and
General Industry National Sales Manager.
According to Joel Levine, president of RFMW, Ltd., "Teaming with Anritsu
now allows us to offer our customers the world's best RF/microwave
coaxial K and V connectors, attenuators, terminations, adapters, dc
blocks, bias tees, dividers, splitters and other components for use in
commercial, military, and test lab applications from dc-65 GHz."
Anritsu's focus on components for test and measurement and
communications applications matches perfectly with RFMW's focus on
serving customers in diverse markets who require a wide range of
RF/microwave components.
"Our immediate goals are to expand Anritsu 'design in' opportunities
using RFMW's high-level of customer support, and to provide expanded
customer support to Anritsu current customers," said Davis.
In addition to RF and microwave components, Anritsu offers a wide range
of high-speed active and passive devices designed to meet the electrical
requirements of next-generation optical network communications.
About Anritsu
Anritsu Company (www.us.anritsu.com) is the American subsidiary of
Anritsu Corporation, a global provider of innovative communications test
and measurement solutions for more than 110 years. Anritsu provides
solutions for existing and next-generation wired and wireless
communication systems and operators. Anritsu products include wireless,
optical, microwave/RF, and digital instruments as well as operations
support systems for R&D, manufacturing, installation, and maintenance.
Anritsu also provides precision microwave/RF components, optical
devices, and high-speed electrical devices for communication products
and systems. With offices throughout the world, Anritsu sells in over 90
countries with approximately 4,000 employees.
About RFMW, Ltd.:
RFMW, Ltd. is a specialized distributor that provides customers and
suppliers with focused distribution of RF and microwave components as
well as specialized component engineering support.
For more information concerning this press release
Contact:
RFMW, Ltd.
90 Great Oaks Boulevard
Suite 107
San Jose, CA 95119
Phone - 408 414 1450
Toll Free - 877 FOR RFMW (367 7369)
info@rfmw.com
www.RFMW.com
|
|
