IPX Series Cable Assemblies
The IPX series connector and cable assemblies feature the micro-miniature IPX connector, which is 100% form, fit and function compatible with all U.FL Hirose series interfaces. IPX cable assemblies can be cut and attached to a variety of RF coaxial connectors.
 
Parametric Probe Card Solutions
Two new Pyramid® parametric probe cards allow single-pass high performance DC and RF measurements and reduce the cost of parametric production test for semiconductors with advanced processes nodes at 65 nm, 45 nm and beyond.
 
Wide Band Splitter Combiner
This new 2-way splitter combiner unit operates between 200 MHz to 18 GHz with 25% bandwidth and can be optimized such as the one shown to 2 to 4 GHz. It operates over the full temperature range of -45 to +85ºC with up to 10W power handling.

Lightweight X/KU Band Synthesizer
The THOR Series frequency synthesizer is the smallest and lightest X and Ku Band synthesizer on the market with uncompromising performance. Available in frequency bands (fixed or programmable) from 1 to 18 GHz, the THOR Series comes in a small package, just 2.5 x 1.1 x 0.35".

X-Band Solid State RF Amp
The SSPA 9.0-10.0-40 is a high power, X-band, solid state RF amplifier that operates from 9.0 to 10.0 GHz. The saturated output power is 40W typical at 25ºC. Typical small signal gain is 58 dB. Noise figure is 10.0 dB typical at 25ºC. Input VSWR is 2.0:1 maximum, output VSWR is 2.0:1 maximum.

High Power VHF Triplexer
Model 4LM10-40/XQ88-N/N will handle 400W CW power simultaneously through all three channels into a 2.0:1 load. The insertion loss is less than 0.5 dB over each channel passband: 40 to 50, 60 to 70, and 80 to 88 MHz. Isolation between channels is specified at 20 dB minimum.

Programmable Synthesizer
The FST Series frequency synthesizer has switch speeds less than 1 µsecond, with less than 1 µsecond delay. This cost-effective, narrowband programmable source is available in custom bands from 100 to 6600 MHz and custom step sizes down to 1 KHz.

Broadband Low Noise Amplifier
Model ABL1200-08-3220 is a low cost, SMA connectorized low noise amplifier module offering 32 dB of linear gain from 1 to 12 GHz with 2.0 dB typical noise figure. It operates with a single +8 to +15V DC power supply voltage. Package size is 1.5 x 0.85 x 0.375".

SLFS Synthesizer Series
The new SLFS Synthesizer Series offers a compact and economical solution for SATCOM and communication systems. It is available in L- through Ku-Band with typical bandwidths of 800 MHz, with an efficient design that dissipates only 2.5W.

Extended Analyzer Platform
The company has extended its signaling analyzer real-time platform to include LTE and SAE technology. The J7880A signaling analyzer is a single scalable, distributed, troubleshooting tool that identifies and isolates customer problems in equipment integration test and final system integration, as well as in network trials, deployment and optimization. The expanded platform ensures signaling analysis for long-term evolution.
 
Band Reject Filters - Tunable
Band stop and cavity filters that can be readjusted by the customer to new center frequencies are now available. These filters are tunable over a +/-7.5% center frequency range with minimal change in bandwidth. Center frequency range is 1000 to 6000 MHz.

Quad-Band EDGE PA Modules
The first two members of the HADRON II PA Module™ family are the TQM7M5012 (pictured) and the TQM7M5005. These second-generation EDGE PAs were designed using the company’s CuFlip™ copper bump technology, improving RF performance while reducing current consumption.