 Two Sides of the DoD Coin: Budgets Slashed, UAV Market Soars
By Fred Ortiz, President
dB Control
As we embark on a new year, imminent cuts to the U.S. Department of Defense (DoD) budget are top of mind for those of us in the military electronics market. At a recent House Armed Services Committee hearing, the nation’s military chiefs cited a $600 billion defense cut as “catastrophic to the military” and having a “severe and irreversible impact.”
Read More... |
|
|
 |
LightSquared:
The Show’s Over
…Or Should Be
By Barry Manz
There are a lot of very technically astute people at the Federal Communications Commission. Many have decades of experience at every level of RF and microwave technology. How then might LightSquared’s proposal for a satellite/terrestrial LTE network have ever gotten past its first hurdle? Even a cursory inspection of the plan, in which the company's network would operate extremely close to GPS frequencies at L-band, makes interference to GPS devices almost a certainty. Read More...
|
|
 Parallel Gap Welder
Model SMAPRO180 parallel gap welding machine can weld gold and silver ribbons as well as enameled wires without additional coating layer stripping steps. It eliminates the expensive and difficult stripping process and results in more reliable joints.
SW Tech Equipment
 Signal and Spectrum Analyzer
The R&S FSW signal and spectrum analyzer comes in three models that cover the frequency ranges from 2 kHz to 8 GHz, 13 GHz and 26.5 GHz. The analyzer outperforms all other high-end instruments on the market, with phase noise values that are up to 10 dB lower.
Rohde & Schwarz
 Externally Biased Balanced Mixer
Model SFB-15-N2 is a V-band, externally biased balanced mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration and proprietary bias circuitry to produce superior RF performance with very LO pumping level.
Sage Millimeter
See all products in this issue
|
|
|
|
| |
February 2010
| Bluetooth Low Energy Test Solution |
Designers and manufacturers of Bluetooth® products can now use a new Bluetooth low energy testing option to conduct radio layer testing that is in compliance with the newly adopted Bluetooth Core Specification 4.0. With the option, engineers can use the MT8852B to complete a test script covering Bluetooth Basic Rate, EDR, and low energy measurements in <15 seconds by pressing a single key, greatly simplifying production test programs.
Anritsu Company
Go
to Website
Email
this product to a friend!
|
|
|
SEARCH MPD’S EXTENSIVE DATABASE! |
MILITARY MICROWAVE DIGEST |
•Switch Solutions for Systems with Low PIM Requirements
Dow-Key Microwave has invested in R&D for new RF switch products designed specifically to reduce intermodulation (IM) in coaxial switches.
Dow-Key Microwave
• How to Specify RF and Microwave Filters
Covers cavity, ceramic, LC, crystal and helical filters.
Anatech Electronics
• Establishing An RF Safety Program
Topics include basic RF safety, standards, monitoring instruments, performing an emitter inventory, and the steps required to create a program.
Narda Safety Test Solutions
• Mounting Considerations for Medium Power Surface-Mount RF Devices
Covers all factors that must be considered when mounting SMT devices.
TriQuint Semiconductor
• Biasing MMIC Amplifiers
How to bias MMICs along with theory and techniques.
Mini-Circuits |
|
|
|
