The Opportunities and Challenges of LTE Unlicensed in 5 GHz
David Witkowski, Executive Director, Wireless Communications Initiative
In 1998, the Federal Communications Commission established the Unlicensed National Information Infrastructure or U-NII 5 GHz bands. These are used primarily for Wi-Fi networks in homes, offices, hotels, airports, and other public spaces and also consumer devices. U-NII is also used by wireless Internet Service Providers, linking public safety radio sites, and for monitoring and critical infrastructure such as gas/oil pipelines.

Uncertain Times for DefenseOpen’s Systems and Changes in DoD Procurement: This Time It’s Real
By Barry Manz

The U.S. Department of Defense has a well-earned reputation for inertia. Many proposals for change are made – but nothing happens. The COTS initiative, which promised cost savings through the use of off-the-shelf commercial parts, sounded terrific at the time. It heralded a major departure from standard DoD procurement that more or less guaranteed that every system would be different in part because it used parts that were developed from scratch, leading to “one-off” systems that were very expensive. Read More...


Band Reject Filter Series
Higher frequency band reject (notch) filters are designed to operate over the frequency range of .01 to 28 GHz. These filters are characterized by having the reverse properties of band pass filters and are offered in multiple topologies. Available in compact sizes.
RLC Electronics

SP6T RF Switch
JSW6-33DR+ is a medium power reflective SP6T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator.

Group Delay Equalized Bandpass Filter
Part number 2903 is a group delayed equalized elliptic type bandpass filter that has a typical 1 dB bandwidth of 94 MHz and a typical 60 dB bandwidth of 171 MHz. Insertion loss is <2 dB and group delay variation from 110 to 170 MHz is <3nsec.
KR Electronics

Absorptive Low Pass Filter
Model AF9350 is a UHF, low pass filter that covers the 10 to 500 MHz band and has an average power rating of 400W CW. It incurs a rejection of 45 dB minimum at the 750 to 3000 MHz band, and power rating of 25W CW from 501 to 5000 MHz.

LTE Band 14 Ceramic Duplexer
This high performance LTE ceramic duplexer was designed and built for use in public safety communication and commercial cellular applications. It operates in Band 14 and offers low insertion loss and high isolation to enable clear communications in the LTE network.
Networks International

See all products in this issue


August 2013

SPDT DC to 40 GHz Switches
SPDT DC to 40 GHz Switches
The new CCR-40K series of SPDT switches features low insertion loss (0.5 dB) @ 40 GHz. It is designed to sustain isolation in the 60 dB range and VSWR under 1.4:1 up to 40 GHz. These switches will be the first configuration; look for transfer and multi-positions in the future.
Teledyne Relays

Go to Website
Email this product to a friend!



You Can
Search by Number:

  All ads, articles, and products in printed issues of MPD have a number. Just look for the red arrow in the ad or at the end of the article or product description.


MMD March 2014

Previous issues click here


The Design of Ultra Narrowband Amplifiers Using Small-Signal Varactor Upconverters
This paper presents a method of realizing tunable microwave amplifiers with ultra narrow bandwidths that can be less than 0.5% by the use of a varactor up-converter (UC).
Planar Monolithics

Directivity and VSWR Measurements
Return loss and VSWR measurements are complicated by the finite performance of the directional device used to measure the reflected power. The only accurate and convenient way to make return loss measurements is with a well matched high directivity directional coupler or bridge.
Marki Microwave

Switch Solutions for Systems with Low PIM Requirements
Dow-Key Microwave has invested in R&D for new RF switch products designed specifically to reduce intermodulation (IM) in coaxial switches.
Dow-Key Microwave

How to Specify RF and Microwave Filters
Covers cavity, ceramic, LC, crystal and helical filters.
Anatech Electronics

Mounting Considerations for Medium Power Surface-Mount RF Devices
Covers all factors that must be considered when mounting SMT devices.
TriQuint Semiconductor

Biasing MMIC Amplifiers
How to bias MMICs along with theory and techniques.

Home | About Us | Archives | Editorial Submissions | Media Kit (PDF) | Events | Subscribe/Renew | Contact Us
Copyright © 2011 Octagon Communication Inc. DBA MPDigest /, All Rights Reserved.
Privacy Policy | Site Map