IN MY OPINION

Evolving at the Speed of Software
By Sherry Hess, VP of Marketing,
AWR Group, NI

Thank you, Dr. Joe Salvo of GE Global Research and the founder and director of the Industrial Internet Consortium for sharing this tagline with me. At NIWeek 2014, Dr. Salvo took the keynote stage to comment on the Industrial Internet in the “systems age,” which has superseded the information age.
Read More...

FROM WHERE WE SIT

Uncertain Times for DefenseIn Defense of DARPA; Lamenting Bell Labs
By Barry Manz

A federal agency like DARPA is a sitting duck for politicians and assorted other critics. It has come up with some truly bizarre programs over years that ultimately either delivered no tangible results, were canceled before they could cause any damage, or attempted to answer questions that nobody was asking or needed answers to. Read More...


CURRENT ISSUE PRODUCTS


Band Reject Filter Series
Higher frequency band reject (notch) filters are designed to operate over the frequency range of .01 to 28 GHz. These filters are characterized by having the reverse properties of band pass filters and are offered in multiple topologies. Available in compact sizes.
RLC Electronics


SP6T RF Switch
JSW6-33DR+ is a medium power reflective SP6T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator.
Mini-Circuits


Group Delay Equalized Bandpass Filter
Part number 2903 is a group delayed equalized elliptic type bandpass filter that has a typical 1 dB bandwidth of 94 MHz and a typical 60 dB bandwidth of 171 MHz. Insertion loss is <2 dB and group delay variation from 110 to 170 MHz is <3nsec.
KR Electronics


Absorptive Low Pass Filter
Model AF9350 is a UHF, low pass filter that covers the 10 to 500 MHz band and has an average power rating of 400W CW. It incurs a rejection of 45 dB minimum at the 750 to 3000 MHz band, and power rating of 25W CW from 501 to 5000 MHz.
Werlatone


LTE Band 14 Ceramic Duplexer
This high performance LTE ceramic duplexer was designed and built for use in public safety communication and commercial cellular applications. It operates in Band 14 and offers low insertion loss and high isolation to enable clear communications in the LTE network.
Networks International

See all products in this issue


 

March 2013

New 2 x 2mm Low Noise Amplifier
New 2 x 2mm Low Noise Amplifier
Design and sales support are available for TriQuint Semiconductor’s TQP3M9037, an internally matched low noise amplifier combining a 0.4 dB noise figure with 20 dB gain and 35 dBm OIP3 in a 2 x 2mm DFN package. Instantaneous bandwidth is 1500 to 2700 MHz.
RFMW, Ltd.

Go to Website
Email this product to a friend!
 

 

SEARCH MPD’S EXTENSIVE DATABASE!

You Can
Search by Number:

   
  All ads, articles, and products in printed issues of MPD have a number. Just look for the red arrow in the ad or at the end of the article or product description.

MILITARY MICROWAVE DIGEST


MMD March 2014
New Military Microwave Digest
WHITE PAPERS

The Design of Ultra Narrowband Amplifiers Using Small-Signal Varactor Upconverters
This paper presents a method of realizing tunable microwave amplifiers with ultra narrow bandwidths that can be less than 0.5% by the use of a varactor up-converter (UC).
Planar Monolithics

Directivity and VSWR Measurements
Return loss and VSWR measurements are complicated by the finite performance of the directional device used to measure the reflected power. The only accurate and convenient way to make return loss measurements is with a well matched high directivity directional coupler or bridge.
Marki Microwave

Switch Solutions for Systems with Low PIM Requirements
Dow-Key Microwave has invested in R&D for new RF switch products designed specifically to reduce intermodulation (IM) in coaxial switches.
Dow-Key Microwave

How to Specify RF and Microwave Filters
Covers cavity, ceramic, LC, crystal and helical filters.
Anatech Electronics

Mounting Considerations for Medium Power Surface-Mount RF Devices
Covers all factors that must be considered when mounting SMT devices.
TriQuint Semiconductor

Biasing MMIC Amplifiers
How to bias MMICs along with theory and techniques.
Mini-Circuits


Home | About Us | Archives | Editorial Submissions | Media Kit (PDF) | Events | Subscribe/Renew | Contact Us
Copyright © 2011 Octagon Communication Inc. DBA MPDigest / MPDigest.com, All Rights Reserved.
Privacy Policy | Site Map