IN MY OPINION
In Memoriam: Jerry A. Bleich
By Karen Hoppe

What can you say about a friend and colleague like Jerry Bleich, who left this world far too soon,
with more life to be lived, more love to share, adventures to plan, and future family joy to experience?
Read More...
MILITARY MICROWAVE DIGEST


MMD March 2014
New Military Microwave Digest

ON THE MARKET


Band Reject Filter Series
Higher frequency band reject (notch) filters are designed to operate over the frequency range of .01 to 28 GHz. These filters are characterized by having the reverse properties of band pass filters and are offered in multiple topologies. Available in compact sizes.
RLC Electronics


SP6T RF Switch
JSW6-33DR+ is a medium power reflective SP6T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator.
Mini-Circuits


Group Delay Equalized Bandpass Filter
Part number 2903 is a group delayed equalized elliptic type bandpass filter that has a typical 1 dB bandwidth of 94 MHz and a typical 60 dB bandwidth of 171 MHz. Insertion loss is <2 dB and group delay variation from 110 to 170 MHz is <3nsec.
KR Electronics


Absorptive Low Pass Filter
Model AF9350 is a UHF, low pass filter that covers the 10 to 500 MHz band and has an average power rating of 400W CW. It incurs a rejection of 45 dB minimum at the 750 to 3000 MHz band, and power rating of 25W CW from 501 to 5000 MHz.
Werlatone


LTE Band 14 Ceramic Duplexer
This high performance LTE ceramic duplexer was designed and built for use in public safety communication and commercial cellular applications. It operates in Band 14 and offers low insertion loss and high isolation to enable clear communications in the LTE network.
Networks International

See all products in this issue


 

July 2014

Solid State Hybrid Power Amplifier
Solid State Hybrid Power Amplifier
Model 50HM1G6AB-47 is a compact, wideband, 50W Class AB solid state hybrid power amplifier module that instantaneously covers 1 to 6 GHz. It operates from a single DC voltage, and provides 48 dB of typical gain with excellent gain flatness, noise figure and low intermodulation distortion for military and wireless applications.
AR RF/MICROWAVE INSTRUMENTATION

Go to Website
Email this product to a friend!
 

 

SEARCH MPD’S EXTENSIVE DATABASE!

You Can
Search by Number:

   
  All ads, articles, and products in printed issues of MPD have a number. Just look for the red arrow in the ad or at the end of the article or product description.


FROM WHERE WE SIT

Uncertain Times for DefenseWill OpenRFM Shake Up the Microwave Industry?
By Barry Manz

Throughout the history of the RF and microwave industry there has never been a form factor standardizing the electromechanical, software, control plane, and thermal interfaces used by integrated microwave assemblies (IMAs) employed in defense systems. Rather, every system has been built to meet the requirements of a specific system, which may be but probably isn’t compatible with any other system. It’s simply the way the industry has always responded to requests from subcontractors that in turn must meet the physical, electrical, and RF requirements of prime contractors. Read More...


Home | About Us | Archives | Editorial Submissions | Media Kit (PDF) | Events | Subscribe/Renew | Contact Us
Copyright © 2014 Octagon Communication Inc. DBA MPDigest / MPDigest.com, All Rights Reserved.
Privacy Policy | Site Map