 Adjustable Delay Line
This manually adjustable delay line (phase shifter) offers continuous adjustment of electrical delay over the frequency range of DC to 40 GHz. Adjustment is through a multi-turn, locking shaft. Low insertion loss and VSWR are maintained during the adjustment range.
 Cavity Duplexer for PCS Bands
The AD1950-2140D269 cavity duplexer was designed for PCS wireless base station applications. Band 1 is 1920 to 1980 MHz and Band 2 is 2110 to 2170 MHz. Insertion loss is <1.5 dB, isolation is > 90 dB, passband ripple is < 0.2 dB, and rejection is >90 dB.
 Bi-Directional Coupler
ADCB-20-82+ is a surface mount, bi-directional coupler, operating over a wide frequency range of 1 to 800 MHz, and housed in a small case measuring 0.31 x 0.27 x 0.16". It uses square cores and a unique patented 1 circuit design to achieve very flat coupling.
 Signal Wave System
The SWS (Signal Wave System) is a low-loss alternative to standard WR75 and WR62 for cross-site runs between switching networks and antennas. It also offers increased power handling capability over traditional waveguides and gives savings on runs as short as 10 meters.
 Flexible, Adhesive-Less Laminates
Delamination caused by deteriorating adhesives that traditionally bond the layers of laminate structures can lead to premature product failure. The company developed a technology to heat laminate high-performance Victrex APTIV® film directly to metal foils or other materials without the need for adhesives.
 IF/Baseband Processing Product Line
A new IF/baseband processing integrated circuit product line includes two new baseband compatible products that combine excellent performance with flexibility and low cost. The HMC 960LP4E dual digital variable gain amplifier and the HMC900LP5E dual programmable low pass filter with driver meet the demand for a universal multi-standard, wideband/carrier, transceiver, which is compact and capable of processing complex high density constellation signals.
 New SPDT Switch
The RAMSES R570 Coaxial Relay Series has been expanded with a 50 GHz SPDT switch featuring three 2.4 mm connectors. The switch is ideal for precision requirements in test and measurement applications where high frequency and excellent RF performance are key.
 Consistent Syringe Dispensing
The Micro-Dot(™) manual syringe dispenser combines a precise, infinitely variable and repetitive hand-held dispenser with a readily available, inexpensive syringe fluid reservoir. It comes in two models, lever-actuated and thumb-actuated.
 High-Performance RF Connectors
A full line of passivated stainless steel RF connectors – SMA, TNC, N-Type, 2.4 mm, 2.9 mm (K) – in jack, plug or bulkhead styles is now available to the open market. They are designed to be mated with cables from Semflex, IW and Harbour.
|
