Current Issue
August 2010
• Electro-Mechanical Broadband RF Switch.
• Single-Stage Driver Amplifier
• Quad-Band EDGE Radio Solution
• Modeling 3G / WCDMA / HSDPA
• Composite Filters
• Integration of Waveguide
• Coaxial Components
• Antennas Needed
• And More...
 
Dow-Key Microwave
 
  Search by TXTLINX Number:
 
   

Fully Matched Cascadable Amp
The TQP3M9009 has been added to the company’s low noise gain block family for high performance 3G/4G infrastructure. This cascadable amplifier is fully matched internally, allowing designers to focus on system level needs. It operates over a broad .05 to 4 GHz frequency range.

Bandpass Filter
Part number 2965-SMA is a 500 MHz bandpass filter. The filter has a typical 1 dB bandwidth of 8 MHz, insertion loss of 6.5 dB and typical 40 dB bandwidth of 52 MHz. It is supplied in a 0.6 x 0.6 x 2.25" SMA package and may be customized for other center frequencies and bandwidths.

UltraFast™ Digitally Programmable LDO
The LT3071 is the second in a family of digitally programmable linear regulators with the lowest dropout voltage, lowest noise, and fastest transient response of any monolithic 5A LDO currently available. Dropout voltage at 5A is an ultralow 85mV. Its QFN package is 4 x 5 x 0.75mm in size.


Microwave Power MMIC
A 4W C-Band GaAs MMIC for satellite applications, the TMD0608-4 operates in the 5.65 to 8.50 GHz range. With this broad bandwidth, a high gain of 27 dB throughout the operating range, and 50 ohm internal matching, this device is well suited for use as a pre-amplifier in C-Band satellite and terrestrial communications.

USB Power Sensors
The U2000 Series USB-based power sensors are compact, portable solutions that allow average power measurements without power meters. All sensors, except the U2004A model, feature internal triggering and trace display capabilities. Current users of these sensors can upgrade their firmware for free.

Directional Couplers
Miniature air dielectric directional couplers are rugged, lightweight devices that offer lower insertion loss than comparable stripline units. The simplified construction allows for greater flexibility in creating customized configurations. Any port can be used as the input with these devices.

Elliptic Lowpass Filter
Part number 2969-SMA is a high order 10 MHz elliptic lowpass filter with sharp transition to the stopband and high stopband attenuation. Typical 1 dB bandwidth is 10.9 MHz with minimum 84 dB attenuation at 13.125 MHz. It is supplied in a 0.6 x 0.6 2.25" package with SMA connectors.

Directional Coupler
Model 110067016 directional coupler has a frequency range of 10 to 67 GHz, 7.25 directivity, and maximum VSWR (any port) of 2.0. Coupling (with respect to output) is 16 +/-1.1 dB and frequency sensitivity is +/-2.0 dB. Operating temperature range is -54 to +85ºC.

Fixed Frequency Synthesizer
The SFS6400A-LF in C-band is a single frequency synthesizer that operates at 6400 MHz. This synthesizer features a typical phase noise of -88 dBc/Hz @ 10 KHz offset and typical sideband spurs of -65 dBc. Its PLL-V12N package measures only 0.60 x 0.60 x 0.13".

Higher Power GaAs FETs
The company has expanded its Ku-Band GaAs FET lineup with two higher output power devices rated for 18 and 30W. Models TIM1213-18L and TIM1213-30L operate in the 12.7 to 13.2 GHz range and are targeted for use in microwave radios for microwave links and satellite communications.
 
EMT SMT Diode TVS Connectors
Now available are transient protection solutions embedded within the connector shell utilizing surface mount (SMT) diodes. Using SMT diode technology allows for increased flexibility in the packaging of transient protection within the connector, saving both space and weight.


Low Noise Gain Block
Model TQP3M9008 is a new low noise gain block that offers high gain over a broad .05 to 4 GHz frequency range. It is a cascadable amplifier that requires no external matching components and can reduce BOMs. The gain block provides 35.5 dBm OIP3, while maintaining a low 1.3 dB noise figure.

 

 

 

January 2008

1 | 2 | 3 | 4 | 5 | 6 | 7 

Tiny VCO

Model ROS-1275+ voltage controlled oscillator (VCO) provides linear tuning with voltage from 1212 to 1275 MHz. The surface-mount VCO provides 0 dBm output power with +/-0.5 dB flatness across frequency and temperature. Size is 0.50 x 0.50 x 0.18".
Mini-Circuits
Click here to receive more info 76
Go to Website
Contact Sales
Email this product to a friend!

Synthesizers
PSA1450F-LF is the first of a new series of state-of-the-art, fast switching and wide band Fractional-N PLL Synthesizers in a small surface mount package (0.8 x 0.6"). This cutting-edge design scheme enables the achievement of very low spurious levels, as low as -80 dBc.
Z-Communications, Inc.
Click here to receive more info 77
Go to Website
Contact Sales
Email this product to a friend!

RF Attenuators
New 5 and 10W 7/16 DIN attenuators cover all wireless bands from DC to 2.5 GHz, making them ideal for base station, in-building or repeater applications where there is a need to reduce signal levels. Standard attenuation values of 3, 6, 10 and 20 are in stock.
MECA ELECTRONICS
Click here to receive more info 78
Go to Website
Contact Sales
Email this product to a friend!

Coaxial Resonator Oscillator
New wideband, RoHS compliant coaxial resonator oscillator (CRO2695B-LF) in S band (2475 to 2915 MHz) features ultra low phase noise performance of -104 dBc/Hz @ 10 kHz offset. This unique design offers typical tuning sensitivity of 44 MHz/V.
Z-Communications, Inc.
Click here to receive more info 79
Go to Website
Contact Sales
Email this product to a friend!

SMA Attenuators
The AHC family of SMA attenuators from Aeroflex / Inmet offers performance at an affordable price. These 2W units operate from DC to 6 GHz with a 1.20:1 VSWR while providing excellent attenuation flatness. They are available in dB values of 1 to 12, 15, 20 and 30.
RFMW
Click here to receive more info 80
Go to Website
Contact Sales
Email this product to a friend!

Tiny Microwave Switch Connector
The SWF Series RF surface mount switch connector for wireless applications is said to be the world’s smallest, measuring just 2.5 x 2.5 x 1.4mm. The small footprint is ideal for cell phones, smart phones, PDAs, Global Positioning Satellites and measurement equipment.
Murata Electronics
Click here to receive more info 81
Go to Website
Contact Sales
Email this product to a friend!

Oscilloscope Card for PCI Express
The UF2e-2031 oscilloscope PCI Express card has four 100 MS/s 8-bit ADCs that are also able to operate in an interpolated mode to acquire two channels at 200 MS/s for increased versatility. Other drivers are supplied, as well as the SBench 5.3 oscilloscope program.
Strategic Test
Click here to receive more info 82
Go to Website
Contact Sales
Email this product to a friend!

New Software Option
A new software option for handheld Ethernet performance testers, FrameScope Pro, simplifies the deployment and troubleshooting of IPTV services and enables service quality tests at the residential gateway. Technicians can acquire statistics of MPEG-2 transport stream issues.
Agilent Technologies
Click here to receive more info 83
Go to Website
Contact Sales
Email this product to a friend!

Wireless Sensor Solution
A revolutionary new product portfolio for ultra-low-power wireless sense and control networks offers standard, easy-to-install wireless communications devices for sensor applications that can operate without power cabling or a battery.
GreenPeak Technologies
Click here to receive more info 84
Go to Website
Contact Sales
Email this product to a friend!

Compact RF Front-End Modules
The FM7805 is said to be the industry’s smallest RF front-end module, in a 4 x 4 x 0.6mm QFN package, with market leading performance for 802.11a/b/g/n dual band and multi-mode WiFi products. The module requires practically no external components.
Epicom
Click here to receive more info 85
Go to Website
Contact Sales
Email this product to a friend!

Vertical Lift Stencil Printers
Two similar high-precision vertical lift stencil printers, each with double-sided board-processing capability, are now available. The 4500R and 5500R both offer a registration repeatability of +/-0.0003” to meet the challenge of ultra-precise solder deposition.
Manncorp
Click here to receive more info 86
Go to Website
Contact Sales
Email this product to a friend!

Band Selective Repeater

Network operators are offered the capability to enhance network performance and improve coverage on their GSM 900 and 1800 networks with the introduction of the BR-900 and 1800 models from the BR Band Selective Repeater Series.
Coiler Corporation
Click here to receive more info 87
Go to Website
Contact Sales
Email this product to a friend!

 

Linear Power Amplifier

A surface mount packaged four stage GaAs MMIC linear power amplifier, the XP1031-QK, features +35 OIP3 and 23 dB small signal gain. It covers 37 to 42 GHz and comes in a high performance, RoHS compliant 7 x 7mm SMT package.
Mimix Broadband
Click here to receive more info 88
Go to Website
Contact Sales
Email this product to a friend!

 

Surface Mount SPC Diplexer
A miniaturized, surface mount GPS diplexer for commercial and military applications supports dual GPS channels of 1227.60 and 1575.42 MHz from a shared antenna. Operating temperature range is -40 to +85ºC.
Integrated Microwave
Click here to receive more info 89
Go to Website
Contact Sales
Email this product to a friend!


 

VHF-Band VCO
The V350ME12-LF VHF band (200 to 350 MHz) VCO for microwave radio applications offers an ultra low phase noise performance of -111 dBc/Hz @ 10 kHz offset. It provides an average tuning sensitivity of 14 MHz/V and covers the bandwidth between 0.5 to 12V.
Z-Communications, Inc.
Click here to receive more info 90
Go to Website
Contact Sales
Email this product to a friend!

 

1 | 2 | 3 | 4 | 5 | 6 | 7


 


Copyright © 2009 Octagon Communication Inc. DBA MPDigest / MPDigest.com, All Rights Reserved.