Home Tag "RFMW LTD."

Field Replaceable SMA Connectors

Design and sales support is now available for 27 GHz, field replaceable connectors from P1dB. The P1CO-SAF2-FE018-27G is a 2-hole, panel mount SMA connector capable of accepting an 18 mil pin on the backside interface. It comes equipped with an EMI gasket that minimizes RF leakage when attached to a suitable housing. RFMW, LTD. (9)

Ultra Low Noise, 2 Stage Bypass LNA

Design and sales support is now available for the Qorvo QPL9065 LNA. Designed with two amplification stages and internal, 2nd stage bypass switch, gain is selectable at 17.5 dB or 37.5 dB. Operational bandwidth is 450 to 3800 MHz. DC power comes from a single positive supply of 3.3 to 5V. RFMW, LTD. (13)

High Power T/R Switch

Design and sales support is now available for a high power SPDT switch from RFuW Engineering. The MSW2T-2041-193 high power PIN diode switch handles 150W of CW power across a bandwidth of 400 MHz to 4 GHz. Peak power handling is up to 550W. Its surface mount package is 5 x 8 x 2.5mm in […]


Joel Levine, President and CEO, RFMW, Ltd. MPD: Millimeter wave frequencies will be used for cellular communications for the first time in 5G. What challenges and opportunities does this present for the microwave industry? JL: 5G challenges begin with cost effectiveness. It makes use of technologies originally used for defense in the millimeter wave bands but also […]

S-Band Radar Transistor

Design and sales support is now available for the AFT31150N RF power, LDMOS transistor from NXP Semiconductors. It provides 150W for S-band radar systems in maritime and weather radar applications between 2700 and 3100 MHz. Qualified up to a maximum of 32V operation, the unit offers 17 dB of gain. RFMW, LTD. (77)

SSMP Cable Assemblies

Design and sales support is now available for SSMP miniature blind mate connectored cable assemblies from P1dB. Operational to 40 GHz, the SSMP connector is also known as SMPM or Mini-SMP and is compatible with GPPO™. They are offered on either .085 or .047 flexible cable with straight, right angle or bulkhead connector options. RFMW, […]

Bluetooth® Low Energy (BLE) FEM

Design and sales support is now available for a low energy front end module (FEM) from Skyworks Solutions. The SKY66113-11 is designed for low energy applications in the IoT market, such as BLE, 802.15.4, Thread, and ZigBee. Integrating a low noise amplifier, transmit bypass, and antenna switches, the FEM provides up to 12 dB of […]

Digital Step Attenuator with USB Control

Application and sales support is now available for the Telemakus TEA6000-95 USB controlled, solid state, RF attenuator. This laboratory quality digital step attenuator (DSA) offers programmable attenuation range of 0 to 95 dB in 0.5 dB steps. It operates from 0.1 to 6 GHz, making it ideal for Automated Test Equipment for WiMAX, LTE, WiFi, […]

DPDT Transfer Switch

Now available with design and sales support is Qorvo’s QPC6222, a dual-pole double-throw (DPDT) transfer switch designed for general purpose switching applications between 5 to 6000 MHz where RF port transfer (port swapping) control is needed. Ideal for multi-mode GSM, EDGE, UMTS, and LTE applications. RFMW, LTD. (6)

Broadband 2-Way Power Splitter

Design and sales support is now available for the MiniRF MRFSP8525 2-way power splitter. With a broad bandwidth of 2 to 2500 MHz, it offers a low cost, surface mount solution for broadband and wireless applications. Typical insertion loss is only 0.15 dB, while isolation is 30 dB. It is capable of handling up to […]