Home Tag "ROHDE & SCHWARZ"

Integrated Signaling Test Solution

The R&S CMX500 radio communication tester adds 5G NR signaling and RF testing to existing R&S CMW500 based LTE T&M solutions in labs. It measures the RF parameters of 5G NR transmissions and performs protocol tests. The tester has a modular design and a state-of-the-art web based user interface.  ROHDE & SCHWARZ (58)

WLAN 2×2 MIMO Signaling Tester

A new test solution has been introduced for WLAN 2×2 MIMO stations in line with the IEEE 802.11ax standard. Using the R&S CMW270 wireless connectivity tester, developers can test the RF characteristics of both transmitters and receivers, allowing them to determine the data throughput in the transmit and receive directions. ROHDE & SCHWARZ (9)

High-End Vector Network Analyzer

The R&S ZNA is a new generation of high-end vector network analyzers offering outstanding RF performance and a unique hardware concept that simplifies measurement configuration. Its excellent measurement stability and trace noise enable users to perform demanding measurements on active and passive components and modules. Thanks to its innovative, DUT-centric approach, the world’s first purely […]

Automotive Radome Tester

Automotive radars are often located behind bumpers and brand emblems. The materials of these covers (radomes) should allow the radar signals to pass through as uniformly and unhindered as possible. With the imaging R&S QAR automotive radome tester, users in development and production environments can now check this easily, reliably, and under automated control.  ROHDE […]

Rohde & Schwarz, iBwave and Anokiwave Partner to Showcase Indoor 5G NR Network

As part of the 5G Expert Days at the Rohde & Schwarz headquarters in Munich, Germany, the three companies have planned, implemented and measured an indoor 5G NR network. The network was created on an experimental frequency license for mmWave at 26 GHz. While 5G NR pre-commercial trials are currently ongoing in several countries mostly […]

Modular RF Switch and Control Platform

Hardware and software have been completely revised for the new generation of the R&S OSP open switch and control platform. It is now optimized for more modules and even shorter switching times. It allows users to combine a wide variety of switch and control modules to form a cost-effective, customized control center for their test […]

High Voltage Differential Probes

The R&S RT-ZHD series of high voltage differential probes offer maximum peak voltages between 750V and 6kV. Featuring up to 200 MHz bandwidth, excellent common mode rejection, and up to 2000V offset compensation, the probes are ideal for analyzing the switching behavior of jumpers as well as small ripple voltages on high DC link voltages.  […]

Enhanced Signal and Spectrum Analyzers

The R&S FSW family of high-end signal and spectrum analyzers now features up to 10 dB lower phase noise compared with the previous models, extremely important in applications such as troubleshooting the modulation of 5G signals in the microwave range. The new R&S FSW analyzers above 26.5 GHz offer an internal analysis bandwidth of 2 […]

Bluetooth® LE Signaling Test Solution

The Bluetooth Low Energy signaling test solution, the R&S CMW270, makes it possible to determine the RF characteristics of a Bluetooth LE device via a Bluetooth OTA (Over-The-Air) link or over a wired connection to the antenna. Users can measure the level, modulation, and receiver characteristics of individual or all data channels for frequency-hopping transmissions, […]