The DRS9300X signal recorder records two RF signals (typically right-hand polarization and left-hand polarization) directly from the multi-coupler between the antenna and receiver. The recorder provides up to 200 MHz of signal bandwidth for each channel with sampling at 500 ms/s. The DRS9300X employs a modular design that allows the recorder to be user-configured for different RF bands by swapping board sets. S-band, L-band, and C-band board sets are available. The DRS9300X accepts an Integrated RF/IF Interface Module providing support for a wide range of RF recording applications and employs 16-bit ADCs and DACs and has more than 80 dB of AGC. The reconstructed RF output can be configured to follow the input signal or provide a fixed output level. Storage capacity is 6 to 24 TB and the recorder complies with the IRIG-106 Chapter 10 standard.