The Model 592-394-001 100 ohm termination is usable from DC to 4 GHz with a 1 W average. VSWR is 1.25:1 and operating temperature range is – 55° C to […]
The 351-354-XXX series 50 ohm fixed attenuators operate from DC to 1 GHz and are rated at 30 W average power with a 1.2:1 maximum VSWR. Standard attenuation values are […]
Impedance matching pads preserve signal integrity by matching virtually any transmission line. The Model 851-879-FMB has 50 VDC maximum blocking, 50 ohm SMA female to 75 ohm F male connector […]
The 251-088-030 is a 50 ohm directional coupler that covers 500 MHz to 2 GHz with a 30 dB coupling value. Frequency sensitivity is +/-0.75 dB or less, insertion loss […]
The 352-023-XXX family consists of 300 W, 50-ohm fixed attenuators that reduce the power delivered in a transmission line without introducing much noise or distortion. The series has an operating […]
The 851-033-BLK is an inner/outer DC block that covers 10 MHz to 18 GHz. DC blocks allow RF frequencies to pass through a circuit with minimal interference while preventing the […]
The 351-276-XXX series 50 ohm fixed attenuators operate from DC to 2 GHz and are available in values between 40 and 80 dB with 1 dB steps. They are rated […]
The 852-078-xxx Series RF detector converts an RF input signal to a DC output signal and operates from 1 to 2500 MHz. The unit can handle an RF input power […]
The Model 552-279-250 250 W termination operates from DC to 4 GHz, is conduction cooled and designed to mount on a heat sink. Maximum VSWR is 1.35:1 and operating temperature […]
The 651-047-031 voltage-controlled programmable attenuator provides up to 31 dB of attenuation in 1 dB steps, operates between DC and 2500 MHz, and is rated at an RF input power […]